The second reason is similar to the first, with the difference that it is not about the properties of the material and the properties of surfaces, with whom he has contact. Because of their physical condition also depends on temperature and humidity environment. For example, according to the instructions of most manufacturers of shingles, it can not be laid at temperatures below +5 C. The fact that the shingles (a sheet with several tiled tiles) has on the one hand adhesive layer, which provides a better grip with wooden base or spread out over its surface lining the carpet. The technology provides that the sun's rays heat the stacked roof and melt the adhesive layer that provides tight grip shingles with the base. In winter, when the sun barely warms, it will not happen, so the roof can quickly lose their properties Waterproof, simply put – will start leaking. Similar conditions (temperature not lower than +5 C) required for the installation of wet front.
His technique involves fixing of insulation material to the wall surface with adhesive and mechanical connectors for followed by laying on top of it plaster and synthetic materials. Binder joining the front plate with a base at low temperature begins to dry and crumble. "To adapt a binding agent for the Winter conditions it is sometimes added to salt, – says Igor Latyshev, director of the Group "Staff", working in the field of production and sales of materials for mounting and wall cladding coatings.