Tag Archives: computers

Solidstate Drives

The rapid development of semiconductor media in recent years has led to the fact that SSD drives are seen as a serious alternative to traditional hard drives. Modern SSD drives are compact and easy to use, as well as the ever-increasing capacity. However, most importantly, that these media provide very low access time to any block of data, high speed reading and writing. In the absence of moving mechanical parts, SSDs have lower power consumption and quiet operation. In addition to the benefits of SSD drives can be attributed to the stability changes in temperature and high reliability.

As a result, SSD drives are now seen as the main rival of hard disk drives that are already here for many years used to store user and account information. Market SSD drives is constantly expanding, offering consumers more and more interesting technological developments and, more importantly, attractive prices. We offer you an overview of the popular SSD drives and new products fall of 2010. First of all, merit a popular line of solid-state drives X25-M by Intel. This series of SSD-drives made by technology multi-level cell (Multi Level Cell, MLC) in the form factor of 2.5 inches. Speed reading the information SSD-drives from Intel is up to 250 Mb / s, and data recording can be done at speeds up to 70 MB / sec. SSD-drives in a line of X25-M is also distinguished by relatively low power – 0.15 W in operating mode and 0.06 watts in idle mode.

Advantages Computer Repairs

In our time, emergency repairs laptops are out of order, or by qualified service staff, or 'away'. This scheme assumes that the master will come to you right in your office or home. Which option choose? At first glance, the laptop repair 'on the road' is much more advantageous, as the owner of technology gets rid of tiresome travel. In fact, this approach can not be called the only correct one, because, first of all, must evaluate the quality and speed of repair work carried out, and after consider various inconveniences. In general, high-quality computer repair depends on three factors: the experience of the master, of its holdings of contemporary equipment and the possibility to change the defective part, if need be. It is these three factors we'll consider in this article. Professionalism in the service centers, repair laptops produce only two or three skilled craftsmen.

Sometimes the process of joining other people. It provides high speed of work of any complexity. Thus, service centers, computer repair always carried out by professionals who guarantee the quality and speed applications. Of course, the 'away' all of the repair performed by one single man, with his often questionable qualifications, because time is really experienced professionals is expensive, and they will not lose it in traffic jams and road. The equipment used at work, regardless of their expertise, the master did not also, if he does not have the necessary equipment and tools: an oscilloscope, termousadok, Soldering station, conductive coatings and adhesives, special lenses, as well as various accessories. In the specialized service the center of all of the above is available in plenty, but rarely has a visiting artist with a full range of necessary diagnostic equipment, since it is expensive and often cumbersome.

As a result of this cause of failure is determined by the rare and repairing laptops by effectively 'by eye'. Replacement parts are often formed that, because laptop repair requires replacement of defective components. For example in the case where any repairs or repair laptop keyboard notebook. Just imagine – how in the world of different models of laptops, and a number of components necessary to equip the service center. Plays an important role and quality of components. If experts understand that the work equipment depends on the quality of each part, the visiting artists that absolutely does not care. In an effort to save they are installed in a laptop cheap parts from unknown manufacturers. Of course, this notebook repair does not lead to positive results and finished the regular damage or injury. Even if the exit specialist very seriously to work, he is not physically able to ensure that the full range of spare parts, and since their delivery often takes 1-2 weeks, which significantly increases the turnaround time. So what's the conclusion we draw from all this mean? Trust repair laptops exclusively for professionals who know all the nuances of their work and guarantee quality repairs, regardless of its complexity.

Computer – A Machine For Information

Computer – a machine for working with data from the 1960s, computers were in wide industrial use. Mainly computers used for scientific computing. In addition, computers are often used for various military purposes. Telecommunications technology in computer science are applied in 70 – x. respectively.

Computers for personal use, called personal computers, are ubiquitous systems for information processing and communication tool in the 1980s, personal computers have become popular for many tasks, including accounting, printing, computing and other predictions mathematical problems. What is a computer program? Computer software – it's just a list of commands to be performed by a computer. Computer programs are divided into simple and complex. Simple computer programs perform fairly simple task, complex programs include a few routines that are intended for more complex programs. Computer hardware – the physical part computer. Most computer hardware do not notice the ordinary users. Do you need emergency computer help – visit the website – a company that provides services such as setting computers, computer repair, PC repair.

Windows Explorer

And to save space you can get rid of unnecessary folders docks, support and etc. In general, do not regret the time and well dug in the settings. The following menu ‘Automation’ edited response file. Shared in the same exposed once and for all, not allowed to continue to make serial key, computer name and credentials record. You can also configure automatic updates, and even monitor option.

The main use for this function is under ‘automatic’. Wrong choice, and during the OS installation will have to perform action, as in the usual installation: ‘Provide defaults’ shows the changed settings as the default settings. At the time of installation you can easily change them; ‘Fully automated’ installs without the possibility of intervention user. If any parameter is incorrect or the driver, the installer skips it, continuing the process of installing himself (gestures to install the operating system become a pressing ‘Enter’); ‘Hide pages’ – specifies that the answer in the column menu – default values. In contrast to ‘provide defaults’, the installation does not display the user interface during installation; ‘Read only’ – mode speaks for itself. The answers are determined and are shown only for reading (unless, of course, These answers do exist). Installation is performed without user intervention, if all columns are filled; ‘GUI attended’ – defines controlled at all stages of installation. When necessary, the user must answer all the questions before completion of installation, and the last option ‘Prompt repair’.

The sixth mode includes the functions needed to repair and restore damaged operating systems. There are very few. Click ‘Settings’ are among the most useful system of options before the installation, for example, changing paths and patches. Penultimate window ‘option’ set up the service Windows XP. You can tweak to advance, which is useful for periodic reinstallation of the operating system. It remains to wait for nLite will generate an assembly, and burn it to ISO-image. The resulting file is replaced, as in the recovery CD from ASUS, and use for other purposes. But the trouble with ‘baby’ Eee not drive! If the hand is not was an external DVD-ROM, I suggest using one of many tools for creating bootable USB-devices, namely – UNetbootin. The principle is simple to outrageous. In Windows Explorer, select the program you just created the image and USB flash drive, which will be loaded. The rest of manipulation will not cause you difficulty, and after a while Windows XP successfully installed on a netbook. The size of its own operating system was only 648 MB (image size of 290 MB), which significantly less than before. But after installing all the necessary software will be enough space for quiet use ASUS Eee 701.

Microsoft Windows XP Professional RU

After the implementation architecture of the parallel execution of code () is, of course, increased computing power system GOALcity Pegal. But any rise again in something rests. Once the processors have made it possible to work regardless of their areas of memory, has spent several times more of this memory. Unfortunately, the default configuration of Windows XP and above applications limited to two gigabytes of RAM. Given the multi- queue, set the write buffer, PreRecord, postzapisi, various branches of detection, analysts and others, especially the network of blocks to copy (when hanging a lot of network clients), this memory is clearly insufficient on large systems. And even small configurations mnogopikselnymi cameras are already experiencing rapid starvation.

One of the IP-based cameras circular form with which we had to work, gives the flow at 65 megabytes per frame. When allowance claims PreRecord 10 frames and “Smooth buffer (), but this camera scores of RAM for one hundred percent. Working with multi-channel player requires buffering a large number of temporary videointervalov. The higher the buffering, the faster response to user actions. A large number of networked clients – this is also a huge consumption of memory. In general, one gigabyte – not once. It and added our own programmers, reworking the code “Pegal” under the regime of Windows – 3GB. Actually, Microsoft says that implementation is well tested.

However, this is not recommended for use in the absence of experience. Get the last is just doing our programmers past six months. Revealed many nuances that must be considered in programming, based on additional memory. As always, no one at Microsoft was not going to share secrets, or even cleaning their own program texts Some operands are getting into the third “gig,” even change their sign. To date, the system considers SpetsLab GOALcity Pegal fully tested for a “superpower” of the regime and recommends that customers who use highly loaded configurations include the option of 3GB. On Windows XP this is done by adding the / 3GB switch in the line boot system file boot.ini, for example:; Warning: Boot.ini is used on Windows XP and earlier operating systems. ; Warning: Use BCDEDIT.exe to modify Windows Vista boot options. ; Boot loader timeout = 30 default = multi (0) disk (0) rdisk (0) partition (1) WINDOWS operating systems multi (0) disk (0) rdisk (0) partition (1) WINDOWS = Microsoft Windows XP Professional RU / NOEXECUTE = OPTIN / FASTDETECT / USEPMTIMER / 3GB on Windows Vista and above should be used in IncreaseUserVA BCDEdit. All this is true only for 32-bit versions. The new release can take a page to users (). In addition, it held an additional optimization of the various processes adjusted non-critical Oshibochka. Attention! Special upgrade is not required! In the previous release did not reveal any critical problems. There have been no official request concerning errors in the program. All done changes – only better and faster, and without running the software.