Solvent Paint

If your car – small-scale production, keep in mind that you can use any type of paint, although preference should be given special paints for body repair. On vehicles fitted with a fiberglass body paint in the upper layer of the material. Acrylic lacquers This type of paint is usually done in spray cans, but it can also apply with spray guns. Acrylic paints give excellent gloss finish, well kept and dry quickly, although complete drying takes about 16 hours. Varnish should be applied after spraying primary enamel to give good surface finish.

It's best not to use conventional cellulose primer under acrylic paints. It is recommended to use special solvents and primers for this type of paint. In addition, you can not mix different acrylic paints, otherwise the coating may crack. Since acrylic paints give a thin film that should be applied in several layers. Lacquer paint dries and hardens, when the solvent evaporates completely. There are acrylic paints, containing in its composition thermoplastics, which soften under the influence of heat. Cars covered with the colors, the production process undergo high-temperature processing.

Such treatment dries out the paint, leading to its hardening and the appearance of an even layer. If necessary, thermoplastic coating can restore other lacquer paints, for which only enough dry. Paint repair factory paint is often not suitable for repainting the car. For example, if the car body subjected to high temperatures to soften thermoplastic paint, it can lead to softening and damage the finish of plastic parts, seats and electrical wiring. Therefore, for repainting produced special paint. They are the following types: lacquer paints, oil paints and synthetic resins, low-melting enamels, two-component paint. These nitro lacquer paint dries very quickly, which is convenient for motorists, since it reduces the probability of contamination of painted surfaces during drying. In order to ensure proper gloss lacquer coating is usually polished after painting.