New Energy Technologies
Engineering design "TPP", and produced equipment allow a 2-fold lower specific energy costs for transportation of loose materials on your company's pipeline, if by pneumatic chamber pumps. Our technology is totally new and on unit costs per tonne of product transported much more efficiently than their foreign counterparts. Proposed technology worked, "TPS" in Belgorod on the pump chamber of domestic production. The cost of upgrading the pump chamber is calculated as 50% of annual energy savings after the introduction of the factory of the customer. The payback period set – 6-9 months. The technology allows for the first year of operation not only to recoup the initial cost of the acquisition module, and net profit in the form of energy savings and off excess fleet of compressors.
"TPP" – and offers another option to upgrade your equipment – an increase in hourly productivity of your existing pump chamber. The main drawback of the existing chamber pumps is excessively high air flow, which is the transport of cement is often greater than 100-120 cubic meters / tonne of finished product. "TPS" has created and successfully implements patented technology transportation of cement from the mills in a silo on the basis of standard chamber pumps TA-23 TA-28 TA-29 TA-60 and their modifications, allowing a 2-fold to reduce the consumption of compressed air (electricity production of compressed air). At the heart of technology is a new principle for creating an abnormally high concentration of the mixture in the chamber tsementnovozdushnoy pump, which is using a special device is transferred without losses to the transport tsementoprovod, ie all during transportation of cement from the mill silo tsementovozdushnaya mixture has a maximum concentration that can not provide the standard chamber pumps TA-23 TA-28 TA-29 TA-60, etc. Convert your existing plant chamber pumps by 2-fold reduction in air flow allows the proposed product (module), embedded in place in the equipment. When the module is installed in the pump chamber is used only to existing holes in the walls of existing vessels, thus there is no weakening of the membrane under pressure, that does not change the mechanical properties of the pump chamber as a result of its modernization. Installing the "TPP" on the customer's existing pump chamber ensures 2-fold reduction in energy consumption (electricity, compressed air) and is produced during the shift of 8 hours. More information can be unat Online: Technology Energy Saving