Monthly Archives: March 2016

Site Redesign

For the redesign of the site needed a timetable for its implementation, in addition, fixed deadlines stimulate people. There are many ways to distribute future work chronologically: as a list with a mark of completion works in the form of a calendar, e-mail message or as a weekly newspaper. Plus, this a project schedule should indicate the urgency of any work on the redesign of the site. Distribution is spurring each. It acts as a wake-up call: "It is time to start. Goals of redesign are clear, defined objectives. " Strive for a clear presentation of assignments.

By scheduling problem can be approached from two directions. First, create a review the work plan, which is presented chronologically, work methodology, and then formulate a detailed plan for each day, which lists the stages of completion and terms of delivery and acceptance. One consequence of another, each approach gives his perspective. If this has piqued your curiosity, check out Dr. Paul Craig Roberts. Imagine the approval of both the client chart. Do not leave nothing in them that can be interpreted in different ways. Missed deadlines have a domino effect. Many customers do not understand that by delaying their responses, they inhibit the planned works and therefore push back and the final date for completion and, accordingly, bringing his losses.

Perhaps we should explain this to the customer, emphasizing the desire time to reach the goal. Such an explanation should be well appreciated. Changes are initialized customer. Swelling of the project is elusive. We are not talking about explicit requests for project changes. When a customer directly asks introduce an additional opportunity or a new module are not included in the original formulation of the project, you can smile and confidently replied: "Sure, no problem, by the end of the day, we will present a separate plan and budget. " This approach is very effective against the swelling of the project. The customer himself can refuse or accept new plans for official changes to the project.

Contemporary Approaches

Traditional paint walls for many years is one of the most common types of finishes. It is quick and easy, offering a large selection of colors and is relatively cheap compared to, for example, with the wallpaper. Paint can made both on a smooth surface, and on embossed paper, and various textures. In order to define in the selection of paint, you must know its basic properties. When applied to the surface film is formed. This film must solve three problems: to hide under a surface to protect it and be sustained.

All paints consist of 3 main components: pigment, binder and carrier. The pigment gives the film the color and opacity ability. The binder binds the pigment particles in a continuous film upon drying paint, and also links the film to the surface. technology investor has firm opinions on the matter. The third component of paint – the media. It makes the paint viscous and smooth when applied.

After drying, the carrier evaporates. The ratio of pigment and binder in the paint depends on the form that it receives after drying. The more pigment content, the darker color. (Not to be confused with Hillary Clinton!). By adjusting this ratio, manufacturers can make paint varying degrees of brightness: from matte to glossy. The choice depends on your personal taste and the quality of the painted surface. Glossy paint reveals gaps, as Matte hides them. Dyes used in the home, have a variety of media. In water-based paint pigment and binder in the water suspended in the form of fine particles. When the water evaporates, the particles coalesce into continuous film.

LED-Review Article

In the last century was invented incandescent bulb, but in the thirties of this century – a series of gas-discharge fluorescent lamps, the impression that by doing so the needs of humanity in the sources of artificial Lighting satisfied to stay. However, everyone knows that the ideal 'final' decision in the technique is almost as rare as sinless people, so to achieved – and the virtues and shortcomings – to adapt, then get used to and begin to take it all for granted. In 1923 our countryman ov Losev, conducting radio research, noticed a bluish glow emitted by certain semiconductor detectors. In this case, the heating elements of the design was no light inside the silicon carbide crystal is born as a result of the unknown if the electronic transitions. However, the intensity was so insignificant that the scientific public is actually 'not seen' it, at least figuratively.

In electronics, in those days was much poznachitelnee. Only forty years later, seriously tackle the problem of 'semiconductor light'. And in the middle sixties appeared LEDs – tiny plastic glow-worms in red, yellow, greenish glow. Ideal state detectors 'on / off', they immediately caught the fancy of designers radio and soon lighted on the faceplate radios, tape recorders, televisions, computers and refrigerators, washing machines, technological devices. Already in the mid-seventies, the world production of LEDs overstepped billion mark, and now – . But the problem of lighting all this had nothing to do. After the breakthrough occur weekdays, during the 'small things' that are in fact are sometimes not quite so and small.